







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Fast, Reliable Fence Installation Across Arlington
If you’re fencing an open lot or a long backyard line in Arlington, the job starts well before the first post goes in the ground. We plan the layout around septic fields, well setbacks, easements and county permitting, because so much of the acreage here sits outside city limits. Our technicians have up to 10 years of experience, and we bring that to every fence line we scope. Call (844) 771-4071. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Arlington Homeowners Call Construction Grand Prairie for Fence Installation

We know Arlington’s lots, and not just the platted ones. That matters here because a fence bid on acreage is a different animal than a subdivision job, and reading the ground correctly before quoting is where a project stays on budget or doesn’t. Homeowners call us back because we walk the property, put the constraints in writing, and scope the drainage and post depth before the number goes on paper.
Our technicians have up to 10 years of experience with wood, privacy, gate and fence work, and we install from commercial-grade suppliers like Master Halco, Barrette and Ameristar. We don’t guess at site conditions from a photo or a phone call. On a long haul or a tight gate onto an open lot, the details only show up on foot, and that’s where we do our homework.
We also treat your fence as part of the whole property. If the grade, the driveway or the roofline is part of the same project, we can line up the work under one plan instead of handing you off between trades. That’s the difference between a fence that sits square for years and one that starts dragging within a couple of seasons.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Our Fence Installation Services in Arlington
Wood Fence
Wood is the workhorse on Arlington acreage, and it’s the material we install most on long rural lines where a privacy run has to hold up to sun, wind and clay movement. Post depth and spacing do most of the work. We set footings deep enough and grade so water runs off the line rather than sitting at the base of the posts.

Privacy Fence
A privacy run on an open lot is about more than height. It’s about how the panels flex in expansive clay and how the bottom of the fence meets the ground so runoff doesn’t undercut it. We plan the layout with the grade in mind and select materials from suppliers like Master Halco and Barrette so the boards stay straight through a North Texas summer.

Fence Gates
Gates take the most punishment on any fence line, and a wide driveway gate on an Arlington acreage lot has to swing true over uneven ground. We build and hang gates with the swing, sag and clearance in mind, and we brace them where the footing has to carry the load. If a shared easement or driveway crossing is in the way, we work that out before the gate is framed.

Aluminum Fence
Aluminum is a good fit where a homeowner wants a clean, low-maintenance line without the sag of wood, and Ameristar is a solid choice for that. On acreage it handles long runs well and doesn’t need the seasonal attention wood does. We’ll talk through where it makes sense and where wood or privacy fencing serves you better.
Trusted Brands We Service in Arlington
We install from names that hold up in this climate, including Master Halco, Barrette, Ameristar and Jerith. We don’t stock parts on a truck or in a yard, so we spec and source materials to the job, which means the right panel for a long open run and the right gate hardware for a wide driveway swing. That approach keeps the turnaround tight once the layout and permits are settled, and it means you get materials from suppliers that architects and custom builders already work with, not whatever happens to be closest to the site.
See the difference
Before
After
Before
After
Before
AfterCommon Fence Installation Problems We See in Arlington Homes
Most of the trouble on an Arlington fence line starts underground and shows up at the gate.
- Posts set in expansive clay without adequate depth or drainage. Seasonal heave racks panels and the gate starts to drag within a couple of seasons. The fix is deeper footings and a grade that sends water away from the line.
- A fence line staked through a septic field, well setback or utility easement. This happens when county requirements are never checked before the layout is priced. On acreage outside city limits, that check comes first.
- Long material hauls and tight equipment access onto an open lot. A vague bid turns into a change order once the real site conditions show up. We scope access and haul distance up front so the number holds.
- Ungraded yards where runoff pools against the fence. North Texas storms and heavy clay soils mean water has to be moved away from the footings, not left to sit there. We correct the grade before the posts go in.
Pricing for Fence Installation in Arlington, TX
A typical vinyl fence installation in Arlington runs $3,500 – $9,000, and aluminum fence installation runs $4,000 – $10,000. Those are estimated ranges for this market, not a fixed quote. A typical wood or privacy run is priced per job once we know the linear footage, post depth, gate count and whether the line crosses a septic field, well setback or easement. County permitting and site grading can move the number as much as the material does. The written estimate sets the final price. Call (844) 771-4071 for a free estimate.
| Service | Typical Estimated Range |
|---|---|
| Vinyl Fence Installation | $3,500 – $9,000 |
| Aluminum Fence Installation | $4,000 – $10,000 |
We Also Serve Cities Near Arlington
We scope and install fence lines around Arlington and the surrounding towns, including Richland Hills, Kennedale, Forest Hill and Hurst. If your property sits on acreage and the permitting path is unclear, we’ll sort that out as part of the scope. You can start with our fence installation team and we’ll take it from there.
Serving Arlington, TX – Our Local Coverage Area
We serve Arlington and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Fence Installation in Arlington

Your written estimate should show linear footage, post depth and spacing, gate count and hardware, the material and brand being installed, how the grade and drainage will be handled, and who pulls any permit required for your property. It should also state how the price is set, so a change order has a paper trail. Call (844) 771-4071 for an exact quote.
Yes, we walk the property first and flag septic fields, well heads and any shared easement before the layout is priced. That’s the single biggest difference between an acreage bid and a subdivision bid, because a fence line staked blind can cost far more to move than it did to quote. Call (844) 771-4071 to set up a walk-through.
Yes, the permitting path is part of what we scope, and outside city limits that often means the county rather than the city. We confirm the route before the layout is priced so the bid you sign matches what gets built. Call (844) 771-4071 for a free estimate.
It’s the site, not the material. Long material hauls, tight equipment access, ungraded ground and the setback checks all add scope that a platted subdivision rarely has. That’s why we grade and walk the ground before we quote rather than after. Call (844) 771-4071 for an exact range on your lot.
Most residential fence lines take a few days once materials and permits are in hand; acreage runs with a wide driveway gate take longer. Weather, ground conditions and the permitting path set the schedule. We’ll give you a realistic timeline with the written estimate. Call (844) 771-4071 to get started.
Written by the team at Construction Grand Prairie.












