







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Fast, Reliable Fence Installation Across Richland Hills
If you’re pricing a new fence in Richland Hills, the first thing to sort out is the property line – not the picket style. We work on built-out lots across this Mid-Cities suburb every week, and almost every fence here is a replacement on an existing line off Loop 820, squeezed between mature trees and tight setbacks. Our technicians have up to 10 years of experience setting posts that hold through North Texas clay, and we know what the 76118 housing stock does to a fence over a season. Call (844) 771-4071 for a free estimate, and we’ll talk through what your lot actually needs.
Why Richland Hills Homeowners Call Construction Grand Prairie for Fence Installation

Richland Hills is a fully built-out inner-ring suburb, which changes how fence work runs here. There are no greenfield lots to build on, so most of what we quote is a rebuild or replacement on a platted line that’s been there since the post-war tract homes went up. That means the job starts with confirming the boundary and checking for easements off the 820 frontage before anything gets ordered.
Local knowledge matters most on the clay. The black-clay soils across Richland Hills swell with rain and shrink through drought, and that movement is what wrecks a shallow, under-concreted post within a wet-dry cycle or two. We spec deeper, concrete-collared posts because that’s what survives here – surface-set posts don’t. We also handle wind-load ratings and the documentation side, because a replacement fence in this corridor is usually tied to an insurance conversation after a hail or straight-line wind event.
Response into Richland Hills, Hurst and the surrounding Mid-Cities runs quick from our Grand Prairie base. When you call, you get a straight read on what your lot needs and what a compliant install includes.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Our Fence Installation Services in Richland Hills
Wood Fence Installation in Richland Hills
Wood remains the workhorse fence on the 1960s-70s slab lots throughout Richland Hills, and it’s the right choice when you want a classic privacy line that you can repair section by section. We set cedar and treated pine posts in properly sized concrete collars so the run stays true through the clay cycle. Small mature lots often need careful staging for panel delivery, which we plan around.

Chain Link Fence in Richland Hills
Chain link is the practical pick for side and back lines where security matters more than privacy, and it holds up well against the summer heat. We source commercial-grade chain link through Master Halco, and we tension the top rail so gates don’t sag after a season of soil movement. On tight inner-ring lots, chain link keeps the footprint slim against the property line.

Vinyl Fence Installation in Richland Hills
Vinyl is gaining ground on the post-war properties where homeowners want the look without annual staining. A typical vinyl install in Richland Hills runs $3,500 – $9,000, depending on run length and gate count. We work with Barrette and Bufftech product lines and set the posts with the same deep concrete collars we use on wood, so the panels don’t lean as the clay moves.

Aluminum Fence Installation in Richland Hills
Aluminum gives you a clean, low-maintenance line that works well around pools, patios and front-yard boundaries on the smaller lots here. Aluminum installs in Richland Hills typically run $4,000 – $10,000. We source Ameristar and Jerith panels, and we orient the posts to the platted line so the run reads square from the street. If you’re planning a broader exterior upgrade, our fence installation work pairs naturally with the rest of an exterior scope.
Trusted Brands We Service in Richland Hills
Fence materials in Richland Hills come from commercial-grade suppliers, and the brands we install matter for how the job holds up. We source through Master Halco, Ameristar, Jerith, Barrette, Bufftech and ActiveYards – product lines with documented wind ratings and manufacturer-backed materials. We connect you with independent local professionals who install these systems, and they order the exact spec your job calls for rather than pulling whatever’s on hand. That’s how the install matches the quote and the paperwork.
See the difference
Before
After
Before
After
Before
AfterCommon Fence Installation Problems We See in Richland Hills Homes
- Posts set in shallow augered holes. Plain augered holes without adequate concrete collars rack and lean within one or two wet-dry clay cycles, dragging gates and panels out of line. It’s the most common failure on the aging lots here.
- Encroachment from unconfirmed property lines. Replacement fences installed without confirming the platted line or easement on a tight inner-ring lot create disputes with neighbors, and $3,500-plus installs are expensive to move after the fact.
- Missing wind-load documentation. Skipping wind-load ratings and windstorm paperwork on a replacement means an insurance claim after a North Texas hail or straight-line wind event can be denied or underpaid.
- Reused footings under a new fence. Reusing a failing footing from a 1970s fence line just transfers the old movement to the new posts, and the new run fails on the old timeline.
Pricing for Fence Installation in Richland Hills, TX

We don’t guess on pricing. Vinyl and aluminum installs make up the bulk of what we quote in Richland Hills, and the published ranges here are typical estimates for the local market.
| Fence Type | Typical Installed Range |
|---|---|
| Vinyl Fence Installation | $3,500 – $9,000 |
| Aluminum Fence Installation | $4,000 – $10,000 |
What moves your number: total run length, post embedment depth required by the clay, gate count and hardware, property-line verification, and the wind-load spec your lot needs. Compliance is part of the cost – a cheap quote that skips the rated posts and the paperwork costs you later. Call (844) 771-4071 for a free estimate, and the written line-item quote sets the final price.
We Also Serve Cities Near Richland Hills
We work the surrounding Mid-Cities too. If you’re in Hurst, Bedford, North Richland Hills or Haltom City, the same clay and the same built-out lot conditions apply, and we cover those cities with the same process. Call (844) 771-4071 and we’ll confirm coverage for your address.
Serving Richland Hills, TX – Our Local Coverage Area
We serve Richland Hills and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Fence Installation in Richland Hills

In most cases, yes – a fence replacement on a built-out lot here usually triggers a permit and inspection tied to height, setbacks and wind-load spec. Because Richland Hills is fully built out, your replacement typically touches an existing platted line, which the city checks. We can walk you through what to ask your city’s building department. Call (844) 771-4071 for details on your lot.
Your fence needs the wind-load rating your local code and setbacks call for, and the product should carry documented compliance – not a verbal promise. In this DFW Airport corridor, wind events are a real stressor, so the rating on the panels and posts matters. Ask your building department for the exact figure that applies. Call (844) 771-4071 and we’ll point you to rated product lines.
Because the black-clay soil here swells with rain and shrinks through drought, and shallow, under-concreted posts can’t resist that movement. The posts heave and lean while the panels rack and gates drag. The fix is deeper, concrete-collared posts set below the active soil zone. Call (844) 771-4071 and we’ll spec the embedment your lot needs.
A compliant quote includes deeper post embedment and concrete collars, rated materials with documented wind compliance, property-line verification, and the permit and inspection steps. A cheap quote often skips the collars, the rating and the paperwork – and those are exactly what saves you on an insurance claim. Call (844) 771-4071 for a written, line-item scope.
A properly documented, compliant install gives you the paperwork to support a claim after a North Texas hail or straight-line wind event, which a code-skipped fence can’t. Windstorm documentation is the piece most cheap installs leave off. We can work with your insurer on the documentation side. Call (844) 771-4071 to schedule your free estimate.
If your fence on a Richland Hills clay lot is leaning, or you’re planning a replacement along the 820 corridor, call (844) 771-4071 for a free estimate. We’ll confirm the platted line, spec the post embedment and wind rating your property needs, and put the scope in writing. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Construction Grand Prairie.












