







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Grand Prairie Homeowners Choose Belgard Construction
We install and repair Belgard paver systems across Grand Prairie – patios, driveways, and retaining walls – and we’re an independent provider, not authorized or endorsed by Belgard. What makes our Belgard work different is the base. We build the compacted, correctly graded foundation under every paver field, because in Grand Prairie that base is what determines whether the surface lasts or rocks apart.
Belgard is a hardscape line: concrete pavers, retaining wall blocks, and the polymeric sand and aggregate that hold them together. We work with Belgard Urbana Stone, Catalina Grana, Dublin Cobble pavers, and Weston Stone retaining walls regularly, so we know how each behaves on North Texas clay. Grand Prairie sits on blackland and limestone clay soils that swell and shrink with wet-dry cycles, and that movement is the root of most Belgard problems we’re called out to fix.
We handle the tear-out, the base prep, and the reset as one job. Call (844) 771-4071 for a free estimate.
Why Trust Construction Grand Prairie for Your Belgard Construction?

Our technicians have up to 10 years of experience with hardscape systems, and Belgard units are among the products they know best. We understand how a Belgard paver is set – the excavation depth, the aggregate gradation, the compaction passes, the joint sand – and that knowledge is what separates a surface that holds from one that fails within a season or two.
We use quality parts that fit Belgard equipment rather than substituting the cheapest local material. When we match Belgard pavers to an existing course, we specify the same series and tonal family so the new units line up with the original color run. Polymeric sand is chosen to the manufacturer’s gradation, not swapped for whatever sand is on hand, because the wrong sand washes out or won’t flex with the clay.
Warranty-safe service matters here. Pulling and resetting pavers on a corrected base doesn’t compromise the material; cutting corners on base depth or using rigid mortar joints does. We work to keep your Belgard installation serviceable for years rather than patching it into a bigger problem. Call (844) 771-4071 for a free estimate.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Belgard Construction Problems We Fix in Grand Prairie
Belgard problems in Grand Prairie almost always trace back to moisture and the clay beneath the pavers. Here are the issues we’re called out to address most often:
- Efflorescence bloom on gray-toned Belgard pavers. A white, powdery haze appears on the surface when alkali salts in the cementitious setting bed react with moisture wicking up through the joints. On Grand Prairie’s swelling clay, water finds its way under the field more readily when drainage is poor, and the bloom returns until the moisture source is addressed.
- Edge spalling and corner chips on Catalina and Urbana pavers. When the sub-base is under-compacted, individual pavers rock slightly under vehicle traffic. That movement chips the edges and pops the corners over time, especially where a driveway takes repeated weight near the garage apron.
- Mortar-joint cracking and weed intrusion on walls and patios. Rigid mortar joints crack as Grand Prairie’s clay expands and contracts, opening gaps where weeds take hold. Flexible polymeric sand moves with the surface instead of fracturing.
- Weston Stone wall settlement and rotation. A retaining wall built without proper geogrid reinforcement and drainage gravel behind the course will lean and settle as the clay shifts. The wall face moves because the soil pressure behind it has nowhere to release.
- Joint sand washout after heavy rain. Spring storms in Grand Prairie push water across a paver field, and joints that weren’t filled and compacted correctly lose sand fast. That exposes the edges and accelerates the next round of problems.
Belgard Parts & Our Repair-vs-Replace Approach

Matching Belgard pavers and wall blocks to the original series is the first step in any repair, because a mismatched unit breaks the color run and the course lines. We track down the right series and tonal family rather than dropping in whatever block is closest on a pallet. We don’t stock or order OEM or genuine Belgard parts as a dealer; we source quality units that fit the system and install them to spec.
Repair is the honest call when one section has failed on a base that can be corrected. We pull the affected pavers, re-excavate and re-compact that zone, reset the Belgard units, and finish with polymeric sand. Full replacement is the right answer when the base is failing under most of the field – patching a widespread settlement problem just pushes the failure down the road.
If your Belgard surface is rocking, spalling, or showing bloom, call (844) 771-4071 for a free estimate and a straight answer on which way to go.
Our Belgard Service Process – Step by Step
- 1
Diagnosis. We walk the Belgard field or wall, check for rocking units, joint condition, efflorescence, and drainage, and probe the base where settlement is visible. On a Grand Prairie property we pay attention to how water moves across the surface during rain.
- 2
Repair or install. For a repair, we pull and stack the affected Belgard pavers, re-excavate and re-compact the base, and reset the units. For a new installation, we excavate to depth, lay and compact the aggregate base, set the Belgard pavers, and cut in edges.
- 3
Test. We check the finished surface for level, confirm joints are filled and compacted, and verify water drains away from the structure rather than pooling.
- 4
Warranty and handoff. We explain what was done, how to maintain the polymeric sand, and what to watch for. Call (844) 771-4071 to schedule your free estimate.
See the difference
Before
After
Before
After
Before
AfterBelgard Products We Service & Install in Grand Prairie

We service and install the core Belgard hardscape products Grand Prairie homeowners rely on for patios, driveways, and walls. That includes paver patios, paver driveways, walkways, and retaining walls – systems built from Belgard concrete pavers and wall blocks laid on a properly compacted base. We handle the full scope: tear-out of a failed surface, base prep, unit setting, edge restraint, and joint sand.
We also service Belgard surfaces that need repair rather than full replacement – relaying a settled section, replacing spalled or chipped pavers, re-sanding joints, and correcting drainage that’s feeding efflorescence. We don’t claim to stock Belgard products; we source quality units that fit the system you already have.
We Also Service These Brands
Belgard is one line among many we work with. Our hardscape work also draws on engineered paver systems from Unilock, Techo-Bloc, Tremron, and Cambridge Pavers, so an owner comparing systems has options under one contractor. Beyond hardscape, we install GAF roofing, KraftMaid cabinetry, Kohler fixtures, and PGT windows and doors – one team, one point of accountability across the project.
FAQs – Belgard Construction Service in Grand Prairie
No. We are an independent Belgard service provider, not authorized, endorsed, or affiliated with Belgard. We install and repair Belgard systems and source quality parts that fit them, but we don’t represent the manufacturer or act as a dealer.
That white haze is efflorescence – alkali salts from the cementitious setting bed reacting with moisture and wicking up through the joints. On Grand Prairie’s expansive clay, poor drainage feeds it. Correcting the water path and cleaning the surface addresses the cause, not just the symptom. Call (844) 771-4071 for a free estimate.
Often, yes. A Weston Stone wall that has rotated in one section can usually be rebuilt course by course with proper geogrid and drainage gravel behind it, leaving the sound portions in place. Widespread leaning across the whole wall is a different story and usually points to full rebuild. We’ll tell you which it is.
Driveways carrying vehicle weight need a deeper, well-compacted aggregate base than a patio, and Grand Prairie’s swelling clay makes that depth non-negotiable. Under-built base is the single biggest cause of rocking and edge spalling we see on Catalina and Urbana driveways. We determine the right depth on site during the estimate – call (844) 771-4071.
Sealing is optional and won’t stop efflorescence on its own if moisture is rising from beneath. The fix is correcting drainage and the base, then sealing if you want surface protection. Sealing over an active moisture problem can trap it. Call (844) 771-4071 to talk through your situation.
We match by series and tonal family, not by eyeballing color. Belgard units are produced in color runs, and the same series can shift slightly between batches, so we source as close to your original as possible and set the new units where the transition reads naturally. Call (844) 771-4071 for a free estimate.
Book Your Belgard Service in Grand Prairie, TX
Rocking pavers, a leaning wall, or white bloom across your Belgard surface – we can assess it and give you a written estimate with the repair-or-replace call spelled out. Call (844) 771-4071 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Construction Grand Prairie.












